There is no single "best" tile adhesive for every job. The best tile adhesive is the one that matches your tile, the area it goes in and the surface underneath. This guide shows you how to choose, using the Indian standard IS 15477 and the Santec range.
Why tile adhesive instead of cement mortar?
Traditional cement–sand mortar is laid thick and depends on site mixing. A packaged, polymer-modified tile adhesive is applied in a thin bed of about 3 mm with a notched trowel. It uses less material, gives a consistent mix every time and bonds far better to modern low-absorption vitrified tiles, which often loosen or sound hollow when fixed on plain mortar.
Understand the IS 15477 classes
Every good tile adhesive in India is classified under IS 15477. The letters on the bag tell you what it can do:
- C2: improved cementitious adhesive with higher bond strength.
- T: reduced slip, so tiles stay in place on walls.
- E: extended open time, giving you longer to place and adjust tiles.
- S1: deformable, so the bed tolerates slight movement (useful outdoors and for large slabs).
- R2T: reaction-resin (PU) adhesive with reduced slip, for difficult surfaces.
Choose by area and tile
| Job | Recommended Santec adhesive | Class |
|---|---|---|
| Ceramic and vitrified tiles, interior floors and walls | Santec Bond 304 | C2 |
| Wall tiling, tile-on-tile on walls, large vitrified tiles (interior) | Santec Bond Plus 405 | C2TE |
| Exterior walls, stone, big slabs, pools and wet areas | Santec Bond Extra 506 | C2TES1 |
| White marble, glass mosaic, light stone, pools | Santec Bond Extra 607 White | C2TES1 |
| Metal, plywood, gypsum, PVC, moisture-sensitive stone | Santec Bond PUA 708 | R2T |
Indoor or outdoor?
Santec Bond 304 and Santec Bond Plus 405 are for interior use only. For balconies, exterior walls and swimming pools, choose a C2TES1 adhesive such as Santec Bond Extra 506 or Santec Bond Extra 607 White, which have excellent underwater shear bond and tolerate movement.
Grey or white adhesive?
Use white adhesive under light-coloured marble, glass mosaic and translucent tiles so the adhesive does not show through. Grey adhesive suits standard ceramic and vitrified tiles and darker stone.
How much adhesive will you need?
A 20 kg bag of Santec Bond 304, 405, 506 or 607 covers about 55–60 sq ft at a 3 mm bed. Coverage drops with thicker beds, uneven surfaces and large tiles that need back-buttering, so keep a small margin when you order.
Need help choosing a product?
Talk to the Santec team for product advice, pricing and dealer details.






