How to apply tile epoxy?

How to apply tile epoxy?

Epoxy grout gives tile joints that stay clean, resist stains and keep bacteria out, which is why it is the first choice for kitchens, bathrooms and busy floors. Applied correctly, it lasts for years. Here is how to do it.

Why choose epoxy grout?

Cement grout is porous and absorbs dirt and moisture. Epoxy grout is a resin system that cures into a dense, non-porous joint. Santec 2K Epoxy is anti-bacterial and anti-fungal, and is recommended for kitchens, operation theatres, hospitals, swimming pools and heavy-traffic areas.

What you need

  • Santec 2K Epoxy or Santec Stain Free Epoxy
  • Grout rake or joint cleaner
  • Hard rubber grout float
  • Mixing tool and a clean container
  • Bucket of clean water and a sponge or scrub pad
  • Gloves

Step 1: Prepare the joints

Wait until the tile adhesive has fully set. Rake out any adhesive, dust or spacers from the joints so the epoxy can fill them to full depth. Joints must be clean and dry.

Step 2: Mix thoroughly

Epoxy cures by chemical reaction, so the parts must be mixed completely in the ratio given on the pack and the product TDS. Santec 2K Epoxy is a two-component system; Santec Stain Free Epoxy has three parts (resin, hardener and filler). Mix only as much as you can apply within the working time.

Step 3: Fill the joints

Press the epoxy firmly into the joints with the rubber float held at an angle, working diagonally across the tiles. Fill the joints completely, with no gaps or air pockets.

Step 4: Clean while it is fresh

This is the most important step. Remove excess epoxy from the tile face with the float, then clean the surface with a damp sponge and clean water before the epoxy starts to set. Santec Stain Free Epoxy is water-cleanable in this fresh state. Change the water often so you do not spread a film over the tiles.

Step 5: Let it cure

Keep the area free of foot traffic and water until the epoxy has cured. Follow the curing times in the product TDS.

Removing epoxy haze

If a thin epoxy film is left on the tiles after curing, Santec HD Cleaner, a pH-neutral heavy-duty cleaner, removes epoxy grout film from tile, stone, quartz and glass mosaic.

Tip: for a decorative finish, mix Santec Sparkle Epoxy Filler (gold, silver or copper) into the epoxy. Sparkle must be mixed with an epoxy grout, never with cement grout.

Need help choosing a product?

Talk to the Santec team for product advice, pricing and dealer details.

Chat on WhatsApp

Products in this article

More from the blog

Commercial · 22 June 2025 Which is the best tile adhesive in India? Commercial · 12 January 2025 C2, C2TE or C2TES1: which tile adhesive class do you need? Residential · 18 February 2025 The Ultimate Guide to Tile Fixing in India: Ensuring Long-Lasting Beauty