C2, C2TE or C2TES1: which tile adhesive class do you need?

C2, C2TE or C2TES1: which tile adhesive class do you need?

Tile adhesive bags carry codes like C2, C2TE and C2TES1. These codes come from IS 15477 and tell you exactly what an adhesive can handle. Once you can read them, choosing the right product takes seconds.

What the letters mean

  • C: cementitious adhesive (mixed with water).
  • 2: improved adhesive with higher bond strength than a basic class 1 product.
  • T: thixotropic, reduced slip. Tiles do not slide down a wall while the adhesive sets.
  • E: extended open time. The spread adhesive stays workable for longer, so you can place and adjust tiles.
  • S1: deformable. The cured bed can flex slightly with temperature and substrate movement.
  • R: reaction-resin adhesive, such as polyurethane, mixed from two parts instead of water.

C2: dependable interior tiling

A C2 adhesive suits ceramic and vitrified tiles on interior floors and walls. Santec Bond 304 is a grey C2 adhesive (IS 15477 Type 2) applied on cement mortar beds, cement plaster, brick masonry and cement terrazzo, and supports tile-on-tile on floors.

C2TE: walls and tile-on-tile

Adding T and E makes the adhesive non-slip on vertical surfaces with more working time. Santec Bond Plus 405 is a C2TE adhesive for interior walls and floors, including tile-on-tile on walls, available in grey and white.

C2TES1: exterior, pools and large slabs

S1 deformability matters wherever there is movement: outdoors, in sun-exposed areas, in pools and under big slabs. Santec Bond Extra 506 and Santec Bond Extra 607 White are C2TES1 (IS 15477 Type 3) for interior and exterior floors and walls, with excellent underwater shear bond for swimming pools and saunas.

R2T: surfaces cement cannot bond to

Cement adhesives do not bond reliably to wood, plywood or metal, and water-based adhesives can warp or stain moisture-sensitive stone. Santec Bond PUA 708 is a two-component polyurethane adhesive (IS 15477 Type 5, R2T) for metal, wood, plywood, gypsum, PVC and existing epoxy floors.

Rule of thumb: interior floors → C2. Interior walls or tile-on-tile → C2TE. Outdoors, pools or big stone → C2TES1. Wood, metal or gypsum → R2T.

Need help choosing a product?

Talk to the Santec team for product advice, pricing and dealer details.

Chat on WhatsApp

Products in this article

More from the blog

Commercial · 22 June 2025 Which is the best tile adhesive in India? Residential · 20 May 2025 How to apply tile epoxy? Residential · 18 February 2025 The Ultimate Guide to Tile Fixing in India: Ensuring Long-Lasting Beauty